DV45 - Raising the Profile

Tuesday, 21 August 2018  |  Admin

 

New DV45 Flange – J6 Rated without a Tie Bar

Doby Verrolec have introduced another Profile to its range of Ductwork Jointing Systems.

The Doby DV45 Flange Profile is approved up to a J6 Joint Rating High Pressure Class D.

Doby DV45 is the only Flange Profile with a J6 Low Pressure rating without the use of a Tie Bar, which greatly reduces the manufacturing times and costs on large ductwork.

A pocketed flange filled with a permanently flexible non-toxic sealant to minimise air leakage.

Tested and certified by BSRIA in accordance with BESA UK (formally HVCA) test procedures DW/TM1.

Doby Verrolec'c DV45 profile fully conforms to the BESA UK Ductwork Construction Standards of DW/144 (2016) and the SMACNA USA Ductwork Construction Standards.

The DV45 Profile is produced from 1.2mm gauge galvanised mild steel with 275g / m2 galvanised coating, complete with 3mm Electro Zinc plated DV45 Corners, Universal G Clamps and 571A DuctSeal Gasket.

Doby Verrolec operate to a BS EN ISO 9001 approved Quality Management System and to an BS EN ISO 14001 approved Environmental Management System ensuring traceability and the highest quality of manufacture.

For more information, please call the Sales Office on +44 1207 238844 or via email at: enq@dobyverrolec.com.